威尼斯在线平台-澳门威尼斯在线登录-官网

Welcome to the official website of Wuxi heavy industry micro bearing factory!
POSITION:HOME > EN > PRODUCTS > 304 SERIES >

304

The basic principle of 304 stainless steel bearing lubrication
1. Method of inspection and oil change
Take a small amount of oil, fresh oil samples and comparative capacity units for oil testing. If the sample shows turbidity and then mixes with water, the result is that we often say that the emulsified oil should have a darker-colored 304 stainless steel bearing. If the sample or process thickens, this may indicate that the oil has begun to carbonize and replace the old oil. If possible, wash the oil with fresh oil. Apply new oil when changing oil, with the old model, refueling to meet the requirements.
2. Oil lubrication system
If the oil temperature is 60 ° C (140 ° F), the oil will not be contaminated, and the oil can be changed once a year. If the oil temperature is 60-100 degrees (140 to 210 degrees F), change the oil four times a year. If the oil temperature is 100-120 degrees (210-250 degrees), change the oil once a month. If the oil temperature is above 120 ° C (250 ° F), change the oil once a week.
PRE:304    NEXT:304

威尼斯在线平台|澳门威尼斯在线登录

XML 地图 | Sitemap 地图